Railway part-load transportation is one of the main modes of railway transportation. If the cargo owner needs less than one vehicle to be transported, the cargo will be delivered as sporadic cargo. The carrier department will assemble the cargo of different cargo owners according to the same arrival station and then ship the cargo. In order to overcome this shortcoming, we have developed a zero-load bus with fixed routes and time. We can also use the flexibility of automobile transportation to develop the zero-load freight transportation with door-to-door service. For example, Japan is now using a large number of "house stool" and "house emergency ambassador" belong to this form.
 
The operation of the Inspection Department is to check whether the contents of the consignment slip are in conformity with the actual situation of the goods after the receipt of the consignment slip by the acceptance personnel of the part-load goods, check the packaging, the weighing party, buckle, label and label.
 
1. Check the waybill
 
Check whether the goods'name, number of pieces and packing marks are in conformity with the consignment documents. Attention should be paid to whether carrying restrictions on the transport of goods or dangerous goods, so as to count the number of pieces one by one, so as to prevent errors. We should make a distinction between the heavy and heavy part-load goods. The main terminal of the terminal shall not exceed the length and height of the truck with no load, and the middle stationer must not exceed the width and height of the rear door of the LV truck; the clumsy heavy goods can not exceed the capacity of the station and the arrival station. Under the condition of manual handling and handling, the weight of a single piece should not exceed 40 kg. Heavy and light goods should be accepted according to the lifting and unloading capacity of starting, transit and arriving stations.
 
2. Inspection of packaging
 
The packaging of goods is the material condition that goods must have to protect the quality of goods in the process of transportation, loading and unloading, warehousing and transit. The quality of goods packaging is directly related to the quality of transportation and the safety of the goods themselves, which must be packaged according to the characteristics and requirements of the goods, in order to achieve the provisions on the packaging of goods in the part-load transportation. If it is found that the goods to be packed are not packed or should be packed internally, but only packed externally, the shipper should be asked to repack them. If the packing is not good or unpackaged but does not affect the safety of loading, unloading and driving, it can be accepted with the consent of the station, but the shipper should be asked to indicate in the consignment note that the bad packing condition and damaged goods should not be stacked in two places, and that the storehouse should be clear-cut, with access, no shoulder-to-shoulder, label outward, arrow upward.
 
(5) Pay attention to the underlying cover of goods stacked in the open air.
 
2) Check around the warehouse regularly. Do not stack items that hinder the safety of goods around the warehouse. Keep the inside and outside of the warehouse tidy.
 
3) During the period of waiting for shipment in the warehouse, the goods should be checked regularly, and the goods and tickets should be checked by tickets.